Product description
Types of Tile & Stone Adhesive System
- BRONCO TILE MORTAR (Type-1) : BRONCO TILE MORTAR Ready to use grey cement based non-shrink, self-curing tile adhesive for ceramic (vitrified/Non Vitrified).
- BRONCO DURA NSA (Type-2) : BRONCO DURA NSA is a ready-touse, thin or thick bed, water resistant, premixed single component, cementitious polymer modified multipurpose tile adhesive in powder form.
- BRONCO DURA FLEX (Type-3) : BRONCO DURA FLEX is a ready-to-use, thin or thick, bed, water resistant, pre-mixed single component, cementitious polymer modified high strength tile adhesive in powder form.
- BRONCO DURA SUPER (Type-4) : BRONCO DURA SUPER is a high polymer modified white/grey cement based tile adhesive suitable for fixing wall and floor tile & natural stone in interior and exterior situations uo to 6 mm bed thickness (can be extended up to 12 mm in area of limited extent).
- BRONCO DURA FIRM (Type-5) : BRONCO DURA FIRM is high polymer modified, white cement based tile adhesive suitable for fixing wall and floor tile & natural stone in interior and exterior situations up to 6 mm bed thickness (can be extended up to 12 mm in area of limited extent).
- BRONCO CEMSHIELD ETA (Type-6) : BRONCO CEMSHIELD ETA is solvent free thixotropic, two-part epoxy adhesive especially formulated for bonding heavy duty ceramic tiles, marble, granite, slabs etc. on concrete/masonry.
Advantages Tile & Stone Adhesive System
- High bond strength.
- Non Slump.
- No primer required.
- High initial and ultimate strength.
- Impermeable to liquids and water vapour.
- Chemical resistant and water resistant
- Suitable for dry and slightly damp.
- concrete surfaces (Moisture tolerant).
- Thixotropic : non-sag in vertical and overhead applications.
- Solvent free and chemical resistant.
- Hardening is not affected by humidity.
- Hardens without shrinkage.
- Different coloured parts (for mixing control).
Use Tile & Stone Adhesive System
- Wall and floor tiles, mosaics, vatrified and fully vatrified tiles, marble, terrazzo and natural stone, Bonding Ceramic, vatrified tile to concrete surfaces floors and walls.
Packing Tile & Stone Adhesive
- Epoxy Grout : 1 kg & 5 kg
- Cement Grout : 1 kg & 20 kg
- Tile Adhesive : 20 kg BOPP Bag